Quality Moulds made to last

Segments 100 – 31.5×31.5×1.8cm – Opening: 2.6cm

Segments 100 – 31.5×31.5×1.8cm – Opening: 2.6cm


With this mould you can make casting samples from frit, crushed glass or other small components without having to cast a refractory mould beforehand. The smooth inside of the mould will give you a shiny surface on the finished piece. Also ideal from prefabricating components from frit etc. to be further used in fused or cast work.

The recommended firing chart will lead to a smooth piece of glass with a glossy surface. The finished piece will shrink somewhat, depending on the amount of glass used. Some coldworking on the edges with a diamond pad may be necessary.

By lowering the temperature to a sinter firing (approx. 720°C) the piece will shrink less and have a rougher ‘Sugary’ look similar to pâte-de-verre.

Creative Ceramics code: 958.SS002
Bullseye code: 8172
TGK code: 3522659
Inner Dimensions: Length: 31.2 cm, Width: 31.2 cm, Height: 0.5 cm
Outer Dimensions: Length: 31.5 cm, Width: 31.5 cm, Height: 1.8 cm
Opening Dimensions: Length: 2.6 cm,